net-misc/eg25-manager: Added extra files for configuration

Package-Manager: Portage-3.0.20, Repoman-3.0.2
Signed-off-by: Gerben jan Dijkman <gjdijkman@gjdwebserver.nl>

net-misc/eg25-manager/eg25-manager-0.3.0.ebuild

@@ -1,4 +1,4 @@
-# Copyright 1999-2021 Gentoo Authors
+# Copyright 2020-2021 Gentoo Authors
 # Distributed under the terms of the GNU General Public License v2
 
 EAPI=7
@@ -26,8 +26,13 @@ S="${WORKDIR}/${PN}-${COMMIT}"
 src_install() {
 	meson_src_install
 	systemd_dounit "${FILESDIR}"/eg25-manager.service
+	insinto /etc/eg25-manager
+	newins "${FILESDIR}"/eg25-pinephone-1.0.toml pine64,pinephone-1.0.toml
+	newins "${FILESDIR}"/eg25-pinephone-1.1.toml pine64,pinephone-1.1.toml
+	newins "${FILESDIR}"/eg25-pinephone-1.2.toml pine64,pinephone-1.2.toml
 }
 
 pkg_postinst() {
 	systemd_reenable --all eg25-manager
 }
+

net-misc/eg25-manager/files/eg25-pinephone-1.0.toml

@@ -0,0 +1,49 @@
+[manager]
+need_libusb = true
+usb_vid = 0x2c7c
+usb_pid = 0x0125
+
+# Uncomment the following if you need to change the modem detection timeout on
+# resume and/or the time during which suspend is blocked after modem boot
+#[suspend]
+#boot_timeout = 120
+#recovery_timeout = 9
+
+[gpio]
+dtr = 358
+pwrkey = 35
+reset = 68
+apready = 231
+disable = 232
+
+[at]
+uart = "/dev/ttyS2"
+configure = [
+# Each command has 4 possible elements:
+#   * `cmd`   : the AT command itself, which will be translated to "AT+`cmd`"
+#   * `subcmd`: the subcommand in case a single AT command can be used
+#               to change multiple parameters, such as QCFG (optional)
+#   * `value` : the commands, argument, usually used to set the value of
+#               a specific parameter (optional)
+#   * `expect`: the expected return value; the command is first executed
+#               without any value in order to query the current state. This
+#               state is then compared to the `expect` string; if they don't
+#               match, the command is then executed with value `expect` in
+#               order to set the parameter to the configured value (optional)
+# A command can have `expect` OR `value` configured, but it shouldn't have both
+    { cmd = "QGMR" },
+    { cmd = "QDAI", expect = "1,1,0,1,0,0,1,1" },
+    { cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
+    { cmd = "QCFG", subcmd = "ims", expect = "1" },
+    { cmd = "QCFG", subcmd = "urc/ri/ring", expect = "\"pulse\",2000,1000,5000,\"off\",1" },
+    { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000" },
+    { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1" },
+    { cmd = "QCFG", subcmd = "urc/delay", expect = "1" },
+    { cmd = "QURCCFG", subcmd = "urcport", expect = "\"usbat\"" },
+    { cmd = "QSCLK", value = "1" },
+]
+suspend = [
+]
+resume = [
+]
+reset = [ { cmd = "CFUN", value = "1,1" } ]

net-misc/eg25-manager/files/eg25-pinephone-1.1.toml

@@ -0,0 +1,50 @@
+[manager]
+need_libusb = true
+usb_vid = 0x2c7c
+usb_pid = 0x0125
+
+# Uncomment the following if you need to change the modem detection timeout on
+# resume and/or the time during which suspend is blocked after modem boot
+#[suspend]
+#boot_timeout = 120
+#recovery_timeout = 9
+
+[gpio]
+dtr = 358
+pwrkey = 35
+reset = 68
+apready = 231
+disable = 232
+
+[at]
+uart = "/dev/ttyS2"
+configure = [
+# Each command has 4 possible elements:
+#   * `cmd`   : the AT command itself, which will be translated to "AT+`cmd`"
+#   * `subcmd`: the subcommand in case a single AT command can be used
+#               to change multiple parameters, such as QCFG (optional)
+#   * `value` : the commands, argument, usually used to set the value of
+#               a specific parameter (optional)
+#   * `expect`: the expected return value; the command is first executed
+#               without any value in order to query the current state. This
+#               state is then compared to the `expect` string; if they don't
+#               match, the command is then executed with value `expect` in
+#               order to set the parameter to the configured value (optional)
+# A command can have `expect` OR `value` configured, but it shouldn't have both
+    { cmd = "QGMR" },
+    { cmd = "QDAI", expect = "1,1,0,1,0,0,1,1" },
+    { cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
+    { cmd = "QCFG", subcmd = "ims", expect = "1" },
+    { cmd = "QCFG", subcmd = "urc/ri/ring", expect = "\"pulse\",2000,1000,5000,\"off\",1" },
+    { cmd = "QCFG", subcmd = "urc/ri/smsincoming", expect = "\"pulse\",2000" },
+    { cmd = "QCFG", subcmd = "urc/ri/other", expect = "\"off\",1" },
+    { cmd = "QCFG", subcmd = "urc/delay", expect = "1" },
+    { cmd = "QURCCFG", subcmd = "urcport", expect = "\"usbat\"" },
+    { cmd = "QSCLK", value = "1" },
+]
+suspend = [
+]
+resume = [
+]
+reset = [ { cmd = "CFUN", value = "1,1" } ]
+

net-misc/eg25-manager/files/eg25-pinephone-1.2.toml

@@ -0,0 +1,42 @@
+# Uncomment the following if you need to change the modem detection timeout on
+# resume and/or the time during which suspend is blocked after modem boot
+#[suspend]
+#boot_timeout = 120
+#recovery_timeout = 9
+
+[gpio]
+dtr = 34
+pwrkey = 35
+reset = 68
+apready = 231
+disable = 232
+status = 233
+
+[at]
+uart = "/dev/ttyS2"
+configure = [
+# Each command has 4 possible elements:
+#   * `cmd`   : the AT command itself, which will be translated to "AT+`cmd`"
+#   * `subcmd`: the subcommand in case a single AT command can be used
+#               to change multiple parameters, such as QCFG (optional)
+#   * `value` : the commands, argument, usually used to set the value of
+#               a specific parameter (optional)
+#   * `expect`: the expected return value; the command is first executed
+#               without any value in order to query the current state. This
+#               state is then compared to the `expect` string; if they don't
+#               match, the command is then executed with value `expect` in
+#               order to set the parameter to the configured value (optional)
+# A command can have `expect` OR `value` configured, but it shouldn't have both
+    { cmd = "QGMR" },
+    { cmd = "QDAI", expect = "1,1,0,1,0,0,1,1" },
+    { cmd = "QCFG", subcmd = "risignaltype", expect = "\"physical\"" },
+    { cmd = "QCFG", subcmd = "ims", expect = "1" },
+    { cmd = "QCFG", subcmd = "apready", expect = "1,0,500" },
+    { cmd = "QURCCFG", subcmd = "urcport", expect = "\"usbat\"" },
+    { cmd = "QSCLK", value = "1" },
+]
+suspend = [
+]
+resume = [
+]
+reset = [ { cmd = "CFUN", value = "1,1" } ]